Official PayPal Seal



  Home > Roof Racks, Carriers >

Yakima Viper Fork Mount Bicycle Bike Carrier Roof Rack System

Yakima Viper Fork Mount Bicycle Bike Carrier Roof Rack System
Yakima Viper Fork Mount Bicycle Bike Carrier Roof Rack System


 
Alternative Views:


Our Price: $129.00

See what all the HYPE is about!

Availability: In Stock
Product Code: 581750

Description
 

The Yakima Viper fork mount bike racks are disc brake compatible and offer superb performance and design-styling in the fork mount bicycle carrier category. Mounts directly to either Yakima round or Thule square crossbars. Not compatible with factory car rack crossbars. Yakima lock core recommended (not included; see accessories below) for securing bicycle inside the carrier.

Yakima Viper Fork Mount Bike Carrier Features:

  • Stainless steel long throw 9 mm quick-release skewer grasps any size mountain or road bike fork.
  • Compatible with single and dual piston disk brakes thanks to unique die cast head.
  • Yakima Viper works equally well with regular road bike forks too.
  • Ergonomically designed lever has same side adjustment.
  • Lockable with Yakima Same Key System (SKS) lock core (not included; see accessories below).
  • Attaches directly to either Yakima round cross bars or Thule base rack square load bars. Please note the Viper is not compatible with factory rack crossbars.
  • Completely secure at high speeds and on rough roads.
  • Easy adjusting red lever provides quick installation and security, even when mounted outside the tower.
  • Fits the widest range of tires and rims with new wheeltray and wheelstrap.
  • All hardware and rear wheel strap included.
  • Yakima Viper easy-to-follow instructions included.
  • Yakima Racks Lifetime Warranty

  • SKS-lockable skewer makes loading your fast and easy and keeps your bike safe and sound (SKS LOCK CORE sold separately)
  • All-new skewer design allows one-handed adjustment
  • Simple tool-free installation and removal of the bike mount from your rooftop car rack system
  • Streamlined tray compatible with most disc brakes
  • Fits car rack systems with round and square crossbars
Our original top of the line locking fork mount. Single and dual piston disc brake compatible. Mounts to round and rectangular bars.

Produced: 2001-2009. 2010-present

History: Reintroduced in 2010 with the updated skewer.

General Information:
Weight: 6-1/2 lbs.
Dimensions: 47” long x 7-3/4” wide at skewer, 2-3/4” wide at wheel tray.
Capacity: 1 bike

Q: What Maintenance do I need to do?
A: Maintenance is important to keep it working properly and to help it last longer. Apply grease to nuts, screws, bolts, and especially the adjusting nut and lever of the locking skewer. Lubricate locks with graphite. Remove the rack when not in use. Clean the rack periodically, especially in marine environments and where road salt is used.

Q: What is the minimum / maximum distance I can have between my crossbars?
A: The viper will safely fit bar spreads from 16” to 42”, however spreads of 16” to 18” are limited to two bikes.

Q: How long is the tray?
A: 39.5"

Q: Does it carry all bikes?
A: The viper carries just about any bike with a quick release wheel skewer. However, there are a few exceptions where one of our other mounts should be used instead. These exceptions include, but are not limited to, bikes with triple clamp forks and forks with dropout spacing (the distance between the forks at the tips) other than 100mm.

Q: How many can I carry?
A: That depends on the bikes and vehicle. First check the Fit List to see if there are any specific limitations for your vehicle (using the online Fit List bike mounts may not be offered or a load limit will be stated in the notes at the end of the process). In general, you will need about 12 inches of crossbar per bike when mounting them alternately front and rear facing. Barring any other restriction the practical limit is usually 4 bikes.

Q: Can I use this bike mount with a factory rack?
A: Fork style mounts will not mount directly to factory crossbars. The bike mount gets its side to side stability from the crossbar. Fork mounts stress crossbars more than upright styles because of their narrowness. Through testing we have found that factory rack crossbars are not strong enough to handle the stress generated by fork mounts.

Q: Can I get the viper with a short wheeltray?
A: No. The long wheel tray is a feature that makes the viper adaptable to vehicles with short rooflines. The long tray is also an integrated part of the design ( it wouldn’t work without it). If your vehicle has enough crossbar spread, the Boa is a less expensive, short tray alternative.

Q: Why would I go with a fork mount over a “upright” style mount, or vise versa?
A: Some like the aerodynamic look and manageability of a fork mount. Some don’t want to hassle with removing the bike’s front wheel and prefer an upright rack. A bike may have unique features (lefty or triple clamp forks, etc.) that limit bike mount choices, but one or more of our mounts will do the trick to keep your bike secure. Look up the specific bike mount for more details.

Q: I need to carry several bikes. Can I place bikes on the car backwards to get more space?
A: Yes, just remember to turn the bike around before riding it.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Roof Racks, Carriers
Roof Racks, Carriers > Bike